®技术指南
覆盖减速机输出扭矩计算、速比与转速选择、服务系数解读、安装方位标准（M1–M6）、IEC 电机接口兼容、润滑、过热诊断、噪声振动排查、轴端形式与替换流程的工程指南。
How to Calculate Gearbox Output Torque
Output torque is one of the most important values in gearbox selection. A useful engineering estimate is T = 9550 × P × η / n₂.
阅读指南 →How to Calculate Gear Ratio and Output Speed
For a simple reduction gearbox, output speed is approximately input speed divided by the transmission ratio.
阅读指南 →Industrial Gearbox Lubrication Guide
Correct lubricant type, quantity and maintenance practice are essential to gear and bearing life.
阅读指南 →Gearbox Mounting Positions M1–M6 Explained
Mounting position determines gearbox orientation and can change lubricant quantity and internal oil distribution.
阅读指南 →Gearbox Noise and Vibration Troubleshooting
Noise and vibration are symptoms rather than diagnoses. Track when the symptom occurs, load dependence, frequency, temperature and recent changes.
阅读指南 →Gearbox Overheating: Common Causes and Checks
Abnormal gearbox temperature can be caused by overload, incorrect lubrication, misalignment, excessive input speed, restricted cooling, bearing problems or internal damage.
阅读指南 →What Is Gearbox Service Factor?
Service factor is a selection margin used to account for duty severity beyond nominal power and torque.
阅读指南 →IEC Motor Frame and Gearbox Interface Guide
Motor power does not uniquely determine the gearbox input interface. Motor frame, mounting form, flange dimensions and adapter geometry must be checked together.
阅读指南 →Industrial Gearbox Replacement Checklist
A gearbox is not a direct replacement simply because the ratio or size code is similar.
阅读指南 →Solid Shaft vs Hollow Shaft Gearbox
Solid and hollow output shafts solve different machine-interface problems.
阅读指南 →