®英文版已审核，其他语言为机器同步版本
Solid Shaft vs Hollow Shaft Gearbox
Solid and hollow output shafts solve different machine-interface problems. Hollow-shaft units can simplify shaft-mounted arrangements, while solid shafts suit couplings, pulleys and conventional driven-shaft connections.
Solid shaft
Often used with couplings, pulleys, sprockets or a separate driven shaft. Key dimensions include shaft diameter, extension and key.
Hollow shaft
Allows the machine shaft to enter the gearbox output. Key dimensions include bore, key/spline or shrink-disc interface, shaft insertion direction and axial retention.
For replacement work, a base size alone is not enough to prove hollow-shaft interchangeability.
How this applies to R, F, K and S gear units
The same engineering principle applies across the CHINFAR four-series platform, but the mechanical layout changes: R is inline/near-inline, F is parallel-shaft, and K/S are right-angle families. Use the principle to define the requirement, then select a configuration within the appropriate family.
Related product families
- R Series Helical Gear Unit
- F Series Parallel Shaft Helical Gear Unit
- K Series Helical-Bevel Gear Unit
- S Series Helical-Worm Gear Unit
相关产品系列与技术资源
需要为您机器配置一款齿轮箱？
请提供电机功率、输入转速、所需输出转速/速比、预期输出扭矩、安装方式，以及可用的安装图纸。承发可据此为您先筛选 R/F/K/S 系列配置，再做最终工程复核。
提交询盘