®英文版已审核，其他语言为机器同步版本
IEC Motor Frame and Gearbox Interface Guide
Motor power does not uniquely determine the gearbox input interface. Motor frame, mounting form, flange dimensions and adapter geometry must be checked together.
Parameters to match
- IEC motor frame
- Motor mounting form, such as flange or foot arrangement
- Motor shaft diameter and extension
- Flange register and bolt pattern
- Gearbox adapter/interface code
A 7.5 kW motor, for example, should not be converted directly into one assumed interface without checking pole count and frame standard.
How this applies to R, F, K and S gear units
The same engineering principle applies across the CHINFAR four-series platform, but the mechanical layout changes: R is inline/near-inline, F is parallel-shaft, and K/S are right-angle families. Use the principle to define the requirement, then select a configuration within the appropriate family.
Related product families
- R Series Helical Gear Unit
- F Series Parallel Shaft Helical Gear Unit
- K Series Helical-Bevel Gear Unit
- S Series Helical-Worm Gear Unit
相关产品系列与技术资源
需要为您机器配置一款齿轮箱？
请提供电机功率、输入转速、所需输出转速/速比、预期输出扭矩、安装方式，以及可用的安装图纸。承发可据此为您先筛选 R/F/K/S 系列配置，再做最终工程复核。
提交询盘