®英文版已审核，其他语言为机器同步版本
Industrial Gearbox Lubrication Guide
Correct lubricant type, quantity and maintenance practice are essential to gear and bearing life. Oil quantity is often mounting-position dependent and should not be treated as one fixed value for every orientation.
Four questions before filling oil
- What is the exact gearbox size and variant?
- What is the installed mounting position?
- What lubricant type/viscosity is specified for the operating conditions?
- Has the unit been supplied pre-filled or dry?
Symptoms of incorrect lubrication
Heat, foaming, leakage, unusual noise and accelerated wear can all be related to lubricant quantity or condition, although they can also have other causes.
How this applies to R, F, K and S gear units
The same engineering principle applies across the CHINFAR four-series platform, but the mechanical layout changes: R is inline/near-inline, F is parallel-shaft, and K/S are right-angle families. Use the principle to define the requirement, then select a configuration within the appropriate family.
Related product families
- R Series Helical Gear Unit
- F Series Parallel Shaft Helical Gear Unit
- K Series Helical-Bevel Gear Unit
- S Series Helical-Worm Gear Unit
相关产品系列与技术资源
需要为您机器配置一款齿轮箱？
请提供电机功率、输入转速、所需输出转速/速比、预期输出扭矩、安装方式，以及可用的安装图纸。承发可据此为您先筛选 R/F/K/S 系列配置，再做最终工程复核。
提交询盘