®英文版已审核，其他语言为机器同步版本
Gearbox Mounting Positions M1–M6 Explained
Mounting position determines gearbox orientation and can change lubricant quantity and internal oil distribution. Always match the installed orientation to the lubrication data for the selected configuration.
Why mounting position matters
The same gearbox size can require different oil quantities in M1, M2, M3, M4, M5 and M6 orientations. The oil level must reach the necessary gear meshes and bearings without excessive churning.
Project rule
If the machine orientation changes after the gearbox is selected, re-check lubrication data before commissioning.
How this applies to R, F, K and S gear units
The same engineering principle applies across the CHINFAR four-series platform, but the mechanical layout changes: R is inline/near-inline, F is parallel-shaft, and K/S are right-angle families. Use the principle to define the requirement, then select a configuration within the appropriate family.
Related product families
- R Series Helical Gear Unit
- F Series Parallel Shaft Helical Gear Unit
- K Series Helical-Bevel Gear Unit
- S Series Helical-Worm Gear Unit
相关产品系列与技术资源
需要为您机器配置一款齿轮箱？
请提供电机功率、输入转速、所需输出转速/速比、预期输出扭矩、安装方式，以及可用的安装图纸。承发可据此为您先筛选 R/F/K/S 系列配置，再做最终工程复核。
提交询盘