®英文版已审核，其他语言为机器同步版本
What Is Gearbox Service Factor?
Service factor is a selection margin used to account for duty severity beyond nominal power and torque. It should be considered with operating hours, starts, shock load and driven-machine behavior.
What changes the required service factor?
- Daily operating hours
- Number of starts and stops
- Smooth, moderate or shock-loaded duty
- Driven-machine inertia
- Reversing or cyclic operation
- Ambient and process conditions
Selection mistake to avoid
Do not choose a gearbox because its nominal torque barely equals the calculated load. The selection should reflect the actual duty and required margin.
How this applies to R, F, K and S gear units
The same engineering principle applies across the CHINFAR four-series platform, but the mechanical layout changes: R is inline/near-inline, F is parallel-shaft, and K/S are right-angle families. Use the principle to define the requirement, then select a configuration within the appropriate family.
Related product families
- R Series Helical Gear Unit
- F Series Parallel Shaft Helical Gear Unit
- K Series Helical-Bevel Gear Unit
- S Series Helical-Worm Gear Unit
相关产品系列与技术资源
需要为您机器配置一款齿轮箱？
请提供电机功率、输入转速、所需输出转速/速比、预期输出扭矩、安装方式，以及可用的安装图纸。承发可据此为您先筛选 R/F/K/S 系列配置，再做最终工程复核。
提交询盘