®英文版已审核，其他语言为机器同步版本
F Series Parallel Shaft Helical Gear Unit FAQ
Common questions about the F Series are collected below. For deeper content, follow the linked technical resources.
FAQ
What is the main difference of the F Series?
The F Series is primarily defined by its parallel-shaft layout and is intended for compact drives where axial space or machine layout favors a parallel-shaft arrangement.
What power range does the F Series cover?
The cleaned reference range is 0.12–200 kW, but the selectable power depends on size, ratio, input speed and duty.
What ratio range is available?
The cleaned series-level reference range is approximately 3.70–281.71. Use the detailed selection table for a specific power and size.
Can I select a gearbox only by motor power?
No. Power must be evaluated together with input speed, required ratio/output speed, output torque, service factor, mounting and external loads.
Can it directly replace another brand with the same size code?
Not automatically. Direct replacement requires a dimension-by-dimension mounting and interface comparison plus a performance check.
Does oil quantity stay the same in every mounting position?
No. Oil quantity can change with mounting position and configuration.
相关技术资源
需要为您机器配置一款齿轮箱？
请提供电机功率、输入转速、所需输出转速/速比、预期输出扭矩、安装方式，以及可用的安装图纸。承发可据此为您先筛选 R/F/K/S 系列配置，再做最终工程复核。
提交询盘