®English content reviewed; other languages are machine-synced copies
K Series Helical-Bevel Gear Unit Specifications
This page summarizes the cleaned model-level capability envelope for the CHINFAR K Series. Use it to narrow the size range; use the detailed selection data to choose a final configuration.
| Item | K Series |
|---|---|
| Gear unit type | Helical-Bevel Gear Unit |
| Shaft arrangement | Right Angle |
| Size range | K37–K187 |
| Reference power range | 0.12–200 kW |
| Reference ratio range | 3.73–210.00 |
| Reference maximum torque range | 200–50000 Nm |
Engineering note: published ranges describe the cleaned reference envelope of the series. The final selectable power, ratio, torque, motor interface and mounting arrangement depend on the exact configuration.
Model capability table
| Model | Power range (kW) | Ratio range | Reference maximum torque (Nm) |
|---|---|---|---|
| K37 | 0.12–3 | 3.73–106.93 | 200 |
| K47 | 0.12–3 | 4.52–119.63 | 400 |
| K57 | 0.12–4 | 5–147.88 | 600 |
| K67 | 0.18–5.5 | 5.2–150.15 | 820 |
| K77 | 0.37–11 | 7.58–210 | 1550 |
| K87 | 0.75–22 | 7.21–194.56 | 2700 |
| K97 | 1.1–30 | 7.13–185.35 | 4300 |
| K107 | 3–45 | 7.49–149.06 | 8000 |
| K127 | 7.5–90 | 8.68–152.25 | 13000 |
| K157 | 11–200 | 12.66–150.41 | 18000 |
| K167 | 11–200 | 17.34–164.5 | 32000 |
| K187 | 18.5–200 | 17.18–179.86 | 50000 |
How to read this table
Power range shows the reference input/motor power envelope associated with the size. Ratio range describes the available reduction range represented in the cleaned source data. Reference maximum torque is a size-level maximum and must not be treated as the continuous rated torque for every ratio and motor combination.
For final selection, use a performance row that matches the actual power, pole count/input speed, ratio, output speed, output torque and service factor.
Related technical pages
- Return to the K Series product page
- How to select the K Series
- Mounting and installation
موارد ذات صلة
هل تحتاج إلى تهيئة علبة تروس لآلتك؟
أرسل قدرة المحرك وسرعة الدخل وسرعة الخرج أو نسبة التروس المستهدفة وعزم الخرج المتوقع ووضع التركيب وأي مخطط تركيب متاح. يمكن لـ CHINFAR استخدام هذه المدخلات لتضييق تهيئة R/F/K/S قبل التأكيد الهندسي النهائي.
أرسل استفسارك